Re: 727 ECU limits

[dave.williams@chaos.lrk.ar.us (Dave Williams)]

-> The software computes rpm in units of 25 rpm and stores this in a
-> byte. 255 * 25 = 6375.  There are other variables in other units, but
-> the 25 rpm one is the main variable.

 I get the feeling messing with that could become a nasty project.


-> The batch injector firing is still done in sync with the "RPM input"
-> (at every 2nd, 3rd, or 4th reference pulse.)

 Hmm... I could cut the number of reference pulses in half by modifying
the reluctor and the fuel would be good to 12,750, which would be great.
But I'd only get every other spark event.  Hmm... but maybe I could use
the 4-cyl code for a distributor engine, which would send four spark
signals per 720 degrees, except use the signals to drive two coil packs,
each of which fires two cylinders at a time?  I'll have to try to sketch
that out.  Might not work anyway.

 Thanks for the help, Ludis!
                                                                                                        
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org