[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 1226870/1227165 conversion



Try reading you finished memcal. the compare that to the file you copied.
Maybe the burner got a bad read on things.
  The fast flashing SES is a serious problem.
If there is no error, try erasing the eprom again, and try to copy it again.
Grumpy




----- Original Message -----
From: "Jeff Kopp" <superchevyparts@mindspring.com>
To: <gmecm@diy-efi.org>
Sent: Friday, June 16, 2000 8:45 AM
Subject: Re: 1226870/1227165 conversion


> Ok, so am I to assume that changing a constant or table in Tunercat and
> simply saving as a new file is not all there is to it?  How do I correct
> this checksum problem?  I hope these questions aren't to simple to be
asking
> on the list but I promise you will only have to tell me once. Thanks for
all
> the help. -Jeff
>
> ----- Original Message -----
> From: Romans, Mark <romans@starstream.net>
> To: <gmecm@diy-efi.org>
> Sent: Thursday, June 15, 2000 10:16 PM
> Subject: Re: 1226870/1227165 conversion
>
>
> > You probably need to recalc the checksum, what it's doing is seeing a
> > checksum error and running in limphome.
> > Mark
>
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org