[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: FAQ ideas

Dave Williams wrote:
> 
> fuel pump - 15 PSI for TBI, 45-ish PSI for port injection.  If the car
>       has no in-tank pump, the pump from a fuel injected Nissan 280 or
>       300ZX or EFI VW Rabbit will work; these are external high pressure
>       pumps.

You can also use a pump off of most any FI Ford (choosing the correct
pressure of course).  Ford likes to mount the "real" pump on the frame
with a second pump in the tank feeding the main pump.  It has been
demonstrated that the in-tank pump isn't needed for normal operation of
the external pump.

-- 
Ludis Langens                               ludis (at) cruzers (dot) com
Mac, Fiero, & engine controller goodies:  http://www.cruzers.com/~ludis/


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org