[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Holley 4barrel TBI, 700 cfm or 454 TB? Q's



No pressure drop whatsoever?
Mine seems to drop like 1.5 psi by 4500 rpm the last time i tested it that is.
Do you really think that could be the problem?

Pablo


At 01:44 PM 6/22/00 EDT, you wrote:
>pablo - you dont have enough air going thru your TB - but you should have 
>plenty of fuel.  My stock TBI pump and the 4bbl has no pressure drop at any 
>setting 
>
>Thanks for listening to my electroyappin!
>Ryan Hampl - a K-State Grad!    kasaryan@aol.com
>139 Hoover Ct.                  Controls Engineer (tubes rule!)  
>Salina, KS  67401               97 B12 / 86 V65 / 93chevy truck EFI 383
>phone  (785) 825 5831           I'M ALWAYS FIRST TO THE GROCERY STORE!
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org