[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: GM Wiper circuit question
Ya he he he he maybe the circuit for the mysterious gm phantom wipe is in
there to he he he...
Mike Rolica
Plant A,
Magnesium Products Division
Strathroy
(519)-245-4040 Ext. 265
-----Original Message-----
From: Vinnie Moscaritolo [SMTP:vinnie@vmeng.com]
Sent: Friday, June 23, 2000 9:05 PM
To: gmecm@diy-efi.org; ihc-digest@digest.net
Subject: GM Wiper circuit question
I would like to get a circuit diagram (or at least and
understanding)
of how the Standard GM column (Mist/Off/delay/low/high) wiper
circuit
from the late 80s/early 90s operated.
I am trying to retrofit the steering column from a early 90's Buick
or
possibly a Z28 for use in my scout (which now has a 350 with 730
TPI)
and I would love to interface the switch for use with IH/Scout wiper
motor.
It seems to me that most GM cars used the standard 5 wire wiper
switches
as far as I can tell:
WHITE(or BLK) is 12v power
PINK goes to washer circuit.
PURPLE, GRAY and GREEN goto the wiper module..
now what is in the wiper module (with delay)???
any ideas or any pointers on whom to ask.
Vinnie Moscaritolo KF6WPJ ITCB-IMSH
http://www.vmeng.com/vinnie/
PGP: 3F903472C3AF622D5D918D9BD8B100090B3EF042
-------------------------------------------------------
"There are more things on this planet with fangs,
claws, poisons and scales than there are things
that are warm fuzzy and full of love.
- It's a simple fact"
- James A Keating
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org