Re: ECM interchangability?

["Bruce Plecan" <nacelp@bright.net>]

> What I'm wondering is if the '727 could be used in controlling
> the 3.4 DOHC instead of it's stock PCM.  I don't want or need 
> the transmission control in my application.  The real reason
> though is that I want to be able to tune the ECM and I believe
> (but haven't verified yet), that the Kalmaker software can be 
> used with the 1227727 ECM to modify / tune it, but likely not
> with the 16149396 PCM the DOHC engine uses.

No, 808 specifically
 
> Any info would be appreciated as well as links to other info
> or FAQ's on the GM ECM's.  Also, I seem to recall a note on
> the DIY_EFI list a couple weeks ago that the archives are up
> somewhere.  Any chance the GMECM archives are up and the web
> page just hasn't been updated yet?

Be welll advised to down load the whole Zip and read thru it
Lots of excellent info
Grumpy
 

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org