[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 730 Memcal was... RE: MAF BLM based tuning



I've seen several ADS "Superchips" on Ebay for 727/730 V8 apps go for
$30-$40 lately.   Assuming these are the entire memcal, might be a cheaper
option than $80 or so at the dealer.

-> Bob Valentine
-> bob@pc-pros.com

At 11:42 AM 7/5/2000 -0400, you wrote:
>Yeah, was noticing that.  Which makes me ask the following question... I'm
>going to need a Memcal for a 730 for an F-body 350.  Prefer not to make my
>own.  Don't need it with PROM or code, I can do all that.  I just want the
>physical package with the resistor networks.  Can anyone help out?
>Steve
>
>-----Original Message-----
>From: Bruce Plecan [mailto:nacelp@bright.net]
>Sent: Tuesday, July 04, 2000 11:36 PM
>To: gmecm@diy-efi.org
>Subject: Re: MAF BLM based tuning
>
>
>
>Gosh, the silence is deafening
>Grumpy
>
>> (This is for MAF '165 ARAP... 383 app)
>> Given that the BLM cell seperators are 13,21,34 g/s, and 700,1200,2000
>> RPM...
>> and as an example, say cells 6 and 10 show high values (160)  and the rest
>> are fine (low 130's).
>> Since I have no VE tables to speak of,  What would be a good first step in
>> settling the bad BLM's back to normal, without affecting the rest of the
>> good BLM's?
>> Please respond without using the word "MAP"   ;-P
>> Extra credit:  Anyone tried expanding or sliding the range that BLM's
>> affect?  like 13,27,40 and 700,1600,2800?
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org