Re: 730 Memcal was... RE: MAF BLM based tuning

["Dan Plaskett" <dynastydan@worldnet.att.net>]

The ADS Superchips are glued or welded together, which makes it difficult to
get apart for erasure and reprogramming.  Call Jeff at Superior Chevrolet.
$45 for dealer chip 913-789-4343.

Dan Plaskett
----- Original Message -----
From: "Bob Valentine" <bob@tecmark.com>
To: <gmecm@diy-efi.org>
Sent: Wednesday, July 05, 2000 6:02 PM
Subject: Re: 730 Memcal was... RE: MAF BLM based tuning


> I've seen several ADS "Superchips" on Ebay for 727/730 V8 apps go for
> $30-$40 lately.   Assuming these are the entire memcal, might be a cheaper
> option than $80 or so at the dealer.
>
> -> Bob Valentine
> -> bob@pc-pros.com
>
> At 11:42 AM 7/5/2000 -0400, you wrote:
> >Yeah, was noticing that.  Which makes me ask the following question...
I'm
> >going to need a Memcal for a 730 for an F-body 350.  Prefer not to make
my
> >own.  Don't need it with PROM or code, I can do all that.  I just want
the
> >physical package with the resistor networks.  Can anyone help out?
> >Steve
> >
> >-----Original Message-----
> >From: Bruce Plecan [mailto:nacelp@bright.net]
> >Sent: Tuesday, July 04, 2000 11:36 PM
> >To: gmecm@diy-efi.org
> >Subject: Re: MAF BLM based tuning
> >
> >
> >
> >Gosh, the silence is deafening
> >Grumpy
> >
> >> (This is for MAF '165 ARAP... 383 app)
> >> Given that the BLM cell seperators are 13,21,34 g/s, and 700,1200,2000
> >> RPM...
> >> and as an example, say cells 6 and 10 show high values (160)  and the
rest
> >> are fine (low 130's).
> >> Since I have no VE tables to speak of,  What would be a good first step
in
> >> settling the bad BLM's back to normal, without affecting the rest of
the
> >> good BLM's?
> >> Please respond without using the word "MAP"   ;-P
> >> Extra credit:  Anyone tried expanding or sliding the range that BLM's
> >> affect?  like 13,27,40 and 700,1600,2800?
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org