[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: '870 to '165 swap.....



So as long as I get a memcal with a v8 calibration, I can put the ARAP bin
on it and be ok, right? I think I've got a memcal from an '87 vette, and
maybe an '87 z28. I'll just erase those and go to work if that's the case.

Craig M.

> -----Original Message-----
> From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of Bruce Plecan
> Sent: Wednesday, July 05, 2000 4:57 PM
> To: gmecm@diy-efi.org
> Subject: Re: '870 to '165 swap.....
>
>
>
> If an auto, I'd recommend a arap..
> Is a 89 calibration, so you need to unplug the 9th injector.
> Grumpy
>
> > I've got an '85 Corvette with the '870 ECM. After tuning this thing for
> the
> > last 8 months, I've run across a friend that has a '165 ECM
> that he is not
> > using and I'm thinking of putting it in my car. It's from an
> '87 Z28. Does
> > it matter what car it came out of? I've also got a stock chip
> from an '87
> > Corvette, ABTD. Would that be a good chip to start with? Suggestions
> please!
> > I use Tunercat to do my editing if that makes any difference.
> >
> > Craig M.
> >
> >
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> >
>
> ------------------------------------------------------------------
> ----------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org