Re: Connector Pins for '747 ECU

[steve ravet <sravet@arm.com>]

There's a FAQ...  I'll add it to the info Bruce has sent me.

Waytek wire has Packard wire and connectors, including weatherpack,
metripak, etc.  Plus all the terminals and crimping tools.  They do have
high minimums last time I checked.  
www.waytekwire.com I think.

White Racing seems to stock a lot of the Packard stuff in onesies:  

http://members.aol.com/bigturbo1/index.html

Napa can get, although they might not stock, GM style connectors.  The
dealer is probably a source also, although a last resort due to cost.

Any other sources?  I'll add them to the FAQ info.

--steve

Scott Lundahl wrote:
> 
> Does anyone know of a source for the connector pins (or the manufacturer of
> such) on the harness side of the ECU connector for a 1227747 ECU?   There
> are some missing on my harness for functions that I would like to add.
> 
> Thanks,
> 
> Scott
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org

-- 
Steve Ravet
steve.ravet@arm.com
ARM,Inc.
www.arm.com
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org