CCC Mods

["Bruce Plecan" <nacelp@bright.net>]

Copy of a recent email to a friend of mine.


> On my own CCC stuff, or for _*good*_ friends,
> I get the Carb Shops idle tube kit and use .031
> The their channel resistor at I think .048
> Then the mains and needles from a 4.1L buick carb  (smaller jet, and
smaller
> rod)
> drill the idle discharge holes out to .085, and adjust as necessary
> (AV, or AH, if possible secondary rods,  CPs easy to find (4.1L))
> Then experiment with Air Valve opening, and hangers for the secondaries
> That's what I do.
> Bruce


> > Hi Bruce,
> >     That carb whistle drives me nuts too.  Most of the time I have found
> > it to be the throttle shafts wore out and blades do not fit the bore.
> > Installing shaft bushings usually fixes the problem.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org