Re: Tuning a 727 or 730 with a Supercharger

["Bruce Plecan" <nacelp@bright.net>]

> Do we have archives past 12/99 now?

Yes

  If so can you direct me to them?

FTP, I forget the name  (something like gmecm....... zip)
Grumpy

> Thanks.
>
> Dan
> ----- Original Message -----
> From: "Bruce Plecan" <nacelp@bright.net>
> To: <gmecm@diy-efi.org>
> Sent: Tuesday, July 11, 2000 4:49 PM
> Subject: Re: Tuning a 727 or 730 with a Supercharger
>
>
> > Back about Mar 2000,
> > John Gwynne posted how to change the eprom over to a 2 bar Map, and add
a
> > Baro input to a 730
> > Grumpy
> >
> >
> > > Sorry the previous post had wrong header
> > >
> > > > Anyone done any 727 or 730 programming with a Centrifugal
> supercharger?
> > I
> > > > just picked up a Paxton SN92 to use on my 61 Corvette. I have 1991
> > > Corvette
> > > > aluminum heads that have been pocket ported, 1991 Corvette FI setup,
> no
> > > EGR
> > > > no AIR. Headman Headers, no CATs, 2inch exhaust pipes back of
> > collectors.
> > > 10
> > > > to 1 CR. 4.11 posi in the rear and a T-56 6 speed tranny. 125hp
> > powershot
> > > > nitrous plate system. I am using TunerCat and the 8D tdf. No
> intercooler
> > > or
> > > > water injection yet. Comments and suggestions welcome.
> > > >
> > > > Dan Plaskett
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo@lists.diy-efi.org
> > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org