RE: time delay = degrees

[Don.F.Broadus@ucm.com]

Thanks much for the info. 
                                Don

> -----Original Message-----
> From:	Shannen Durphey [SMTP:shannen@grolen.com]
> Sent:	Wednesday, July 12, 2000 9:17 PM
> To:	gmecm@diy-efi.org
> Subject:	Re: time delay = degrees
> 
> Don.F.Broadus@ucm.com wrote:
> > 
> > A dial back to zero timing light delays the flash by the amount you turn
> the
> > advance dial. The dial is calibrated in degrees. Working on building a
> dash
> > mounted advance meter. Does anyone have the formula or conversion chart
> for
> > time = degrees ?
> > For example 30 degrees advance is equal to 12.5 ms  time , that way I
> could
> > cal the advance meter correctly.
> > 
> > Thanks
> > 
> > Don
> > 
> > 
> I'm not really good with math, but I get (1/(rpm/60))/360deg =
> secs/deg.  
> 
> So at 2000 RPM, 30 degrees=2.5ms.  This seems to jive with my ecm
> benched scope readings.
> 
> Shannen
> --------------------------------------------------------------------------
> --
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org


*********************************************************************************
This E-mail and any of its attachments may contain Unicom proprietary
information, which is privileged, confidential, or subject to copyright 
belonging to the Unicom family of Companies.  This E-mail is intended
solely for the use of the individual or entity to which it is addressed.  If
you are not the intended recipient of this E-mail, you are hereby notified
that any dissemination, distribution, copying, or action taken in relation
to the contents of and attachments to this E-mail is strictly prohibited
and may be unlawful.  If you have received this E-mail in error, please
notify the sender immediately and permanently delete the original and
any copy of this E-mail and any printout.  Thank You.
*********************************************************************************
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org