Re: '92 Y-body LT1 bin file needed.

["Jim Wilson" <Wilson.James4@worldnet.att.net>]

Craig,

On the 92Y Body ECM # 16159278 there is no speedometer adjustment done thru
the ECM.





-----Original Message-----
From: Craig Marcho <marcho@flash.net>
To: gmecm@diy-efi.org <gmecm@diy-efi.org>
Date: Saturday, July 15, 2000 8:18 AM
Subject: RE: '92 Y-body LT1 bin file needed.


oops. supposed to be sent off list....

> -----Original Message-----
> From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of Craig Marcho
> Sent: Saturday, July 15, 2000 10:12 AM
> To: gmecm@diy-efi.org
> Subject: RE: '92 Y-body LT1 bin file needed.
>
>
> well, here's what I got so far...
>
> BDBJ4776 1992 Corvette, LT1, 3.07 rear gear, auto trans
> BDBK4779 1992 Corvette, LT1, 2.59 rear gear, auto trans
>
> I'm trying to help a friend who is going from 2.59 rear to 3.07.
> To correct
> the speedo, it's done in the chip, right? He won't need to change anything
> down by the tranny, will he?
>
> If you've got any other files to send, I'd appreciate it. I'm also on the
> hunt for any aftermarket bins to compare to. I've done alot of work on '85
> Corvette's but not the LT1. I've got files from Ed Wright, TPIS, and
> Hypertech for my '85 but need to know what kind of changes to do on LT1
> motors. They are just a little different than my '85!
>
> Thanks,
> Craig M.
>
> > -----Original Message-----
> > From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> > Of Jim Wilson
> > Sent: Friday, July 14, 2000 1:15 AM
> > To: gmecm@diy-efi.org
> > Subject: Re: '92 Y-body LT1 bin file needed.
> >
> >
> > Craig,
> >
> > If you still need the 92LT1 Y body file E-Mail me off list.
> >
> >                            Jim
> >
> >
> > -----Original Message-----
> > From: Craig Marcho <not_valid_email@airmail.net>
> > To: gmecm@diy-efi.org <gmecm@diy-efi.org>
> > Date: Thursday, July 13, 2000 12:29 PM
> > Subject: '92 Y-body LT1 bin file needed.
> >
> >
> > Anyone know where I can get an LT1 bin for '92 Y-Body?
> > Tunercat website says it used a 16159278 ECM. What's that?!?!
> >
> > Thanks,
> > Craig M.
> >
> > ------------------------------------------------------------------
> > ----------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> >
> >
> >
> >
> > ------------------------------------------------------------------
> > ----------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> >
> >
>
> ------------------------------------------------------------------
> ----------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org