Re: MAF BLM based tuning

[romans@starstream.net (Romans, Mark)]

Hi Dave:  Sorry for the deafening silence!  I will send you a copy of my bin
if you want.  I adjusted the flows at low grams in the maf calibration, I
have also adjusted (Widened) the Block learn cell parameters.  (Using 89 YB
code)
Mark
----- Original Message -----
From: "Dave Zug" <dzug@delanet.com>
To: <gmecm@esl.eng.ohio-state.edu>
Sent: Tuesday, July 04, 2000 12:42 AM
Subject: MAF BLM based tuning


> (This is for MAF '165 ARAP... 383 app)
> Given that the BLM cell seperators are 13,21,34 g/s, and 700,1200,2000
> RPM...
>
> and as an example, say cells 6 and 10 show high values (160)  and the rest
> are fine (low 130's).
>
> Since I have no VE tables to speak of,  What would be a good first step in
> settling the bad BLM's back to normal, without affecting the rest of the
> good BLM's?
>
>
> Please respond without using the word "MAP"   ;-P
>
> Extra credit:  Anyone tried expanding or sliding the range that BLM's
> affect?  like 13,27,40 and 700,1600,2800?
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org