[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN



Thanks Mike and all.  I have Vet bin's thanks, they won't work on F body's
due to some air and ac differences.  I suppose they would work with a lot of
work!
I wanted to look at the iac control differences.
Thanks.
Mark
----- Original Message -----
From: "Michael Davis" <davis@mail.eecis.udel.edu>
To: <gmecm@diy-efi.org>
Sent: Monday, July 17, 2000 6:31 AM
Subject: Re: 89 Camaro/Firebird 5.0 5-Speed TPI BIN


>
>
> I have two bins on my page from '89 z28/m5 TPI cars, not the BCCs listed
> though..
>
> APYS9350.BIN Stock '89 Z 305 w M5, A/C & 3.45 (fed)
> AUJS3509.BIN Stock '89 Z 305 w M5, A/C
>
> mike
> http://www.eecis.udel.edu/~davis/z28/
>
>
> In message <003801bfef97$aaf2c400$48d4cd3f@computer>,"Romans, Mark"
writes:
> >Hello All:  I am looking for an 89 Camaro/Firebird 5.0 5-Speed TPI BIN.
> >Broadcast codes are listed below.
> >Any help is appreciated. Trying to solve a start up idle flare on a 89
> >Firebird that now has a 6 speed instead of an automatic.
> >The installation of the 6 speed seems to have caused this.  The same bin,
> >installed in an automatic does not do the flare.
> >I have set the IAC park position to 60 counts instead of 160 and it is
> >better, but still flares.  I am hoping a man trans calibration (I can
check
> >to see what the differences are) will help solve it.
> >Thanks.
> >Mark
> >
> >ANYR  9338
> >ANYS  9350
> >ANYT  9360
> >ANYU  9366
> >ANYW  9370
> >ANYY  9379
> >ANZA
> >
> >
> >
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org