[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Injector R+R



Manifold on bench
Sounds like something that needs adult supervision
Little guys aren't adults by any stretch of the imagination
Grumpy


----- Original Message -----
From: "Steven Ciciora" <ciciora@Ciciora.com>
To: <gmecm@diy-efi.org>
Sent: Saturday, July 22, 2000 6:14 PM
Subject: Re: Injector R+R


> I was thinking, rotate the crank till the intake valve is open, with some
> jumpers, fire the injector for a few ms, then put a spark coil on the
> spark plug, hooked up to an old points distributor... naw, mabe not such a
> good idea.
>
> On Sat, 22 Jul 2000, Garfield Willis wrote:
>
> > On Sat, 22 Jul 2000 17:02:53 -0400, "Bruce Plecan" <nacelp@bright.net>
> > wrote:
> >
> > >Other then WD-40 anyone got any tricks for getting the port gm
injectors
> > >out?.
> >
> > I dunno, but offhand I'd say have oneOthe little guys climb down inside
> > the intake with a hammer and a wooden drift pin, and have him whack it
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org