Re: Injector Duty cycle calculations

[ECMnut@aol.com]

> 
>  That would explain the .5 or so faster than mine.  I had 1.75 unequal
>  length headers, and a borla 3" single exhaust.  The new motor gets 
>  hooker long tubes and a dual 2.5" or a single 3.5 or 4".  The new
>  motor with everything on it should run in the 11.5 range.
>  
   ...
That is a conservative goal..  You should be able to do it with 
considerably  less RPM.  The extra cubes and 1/4 inch of stroke
are a real torque farm.    Well, traction permitting..  (-8
 Please keep us informed..
Mike V
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org