[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Was Chip carrier now sockets



> Maybe someone could design a little board with rows of single header
> pins at 0.4" or whatever to plug into the ECM, and .6" holes for a ZIF
> or other socket.  Would be much cheaper than buying little plastic
> things.

    I had a local electronics shop install a zip socket in one of my
    ECMs. Works perfectly. I no longer have intermittent problems
    with a chip not being properly seated. My cost here was around
    $50. You may be able to get it done for around the same price
    in your town.

        Ed

--

Every Day In Every Way,
I Love My Bandit More And More

Bandit 1200 10.64 @130 Head never been off
1987 GN Traction Limited Mid 13.

Edward J. Malkiewicz
Las Vegas, Nevada
krazyed@worldnet.att.net
702-645-5997 (Home)
702-245-9053 (Cell)


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org