[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Writting to memcals



Well, 3x at the 21 one did write, next time needed if the others are goofy,
will try that.
Thanks
Bruce




> I wonder if these are the old 25 volt VPP PROMS?
> At 02:15 PM 7/28/2000, you wrote:
> >I need a clue.
> >I have 3 memcals, that take 3x the normal erase time, and refuse to take
a
> >"burn".
> >One is a 256K that was used where it just needed to be a 128K, and the
other
> >is a 128K where a 128K was used.  I also, have an aftermarket doing the
same
> >thing.
> >   I've tried 27128, 27C128, and 27128A.
> >And when I use the generic take outs just to check the system, they work
> >fine...
> >Any advise welcome
> >TIA
> >Grumpy


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org