Re: 1971/350 C10 EFI question

[Shannen Durphey <shannen@grolen.com>]

KasaRyan@aol.com wrote:
> 
> get the complete EFI system from a 86-92 truck, 
Should mention "old" body style.  "New" style pickups (which are now
old style thanks to the Silverado) are different.

if you can, use a complete
> late model in tank pump setup, if not, then you need a 15psi electric pump
> near the tank feeding a 3/8 line and a 5/16 return line from the tbi back to
> the tank.  Or you may wish to use the old fuel line forr the return and run a
> new fiel line.  Do not use the original vapor line for your return as it does
> not flow enough and will add all kinds of wierd idle problems.
I take it this is the voice of experience?
Shannen
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org