[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

re-calibration software



Just a quick question. What is the software "Programmer" and "GMEpro" that
you guys refer to on occasion? Thanks for your time.

Regards.....

Phil Rickard- Engine builder/Tuner for Les Stanford-Pirate Racing Corvette
C5R......Formerly with L.P.E.
----- Original Message -----
From: Bruce Plecan <nacelp@bright.net>
To: <gmecm@diy-efi.org>
Sent: Wednesday, July 05, 2000 11:19 PM
Subject: Re: Mandatory TC Lockup


> I don't know about anyone else, but I've forgotten what Mask ID /
> application your working one.
>
> > Remember my discussion earlier about the mandatory TC lock up at approx.
> > 80mph.  I've heard through the grapevine that GMEPro can change this
> lockup
> > point.  Is that true?!?
>
> The editors all vary some from application to application, so you have to
be
> specific.
>
>   I didn't think that there were any programs
> > currently on the market that could actually change values contained in
the
> > GM 'program' in the other half of the BIN.
>
> Promgrammer allows changes for the whole  (749) "bin"
> GMEPro gets real close to that in some applications
> Tunercat also varies some by application
> There is some old editors that also allowed for major tuning, like the
> Fueltronics 808 stuff.
>
>   I know that neither TunerCat nor
> > WinBin can do it.  I wouldn't think that GMEPro could do it either since
> > this value doesn't seem to be in the .ecu file.
>
> Each offering generally has it's strong and weak points, and that can even
> vary by application.  There is a huge amount of work that goes into hacing
a
> bin into what a editor needs, and at times they just have to stop.
> Grumpy
> >
> > Thanx in advance,
> > Tim
> >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org