[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: big inch SBC EFI intake mainfold
The Edelbrock ProFlow is a Victor Junior w/ Bungs and fuel rails - It's in their
parts book..Tom S
PS I have a 406 version of your motor.
ECMnut@aol.com wrote:
> Can't you just weld some bosses for injectors onto a Victor Jr
> or similar flowing unit?
> MV
>
> >
> > I have access to the ( both people and equipment) cad/cam setup to do
> solid
> > modeling. And the plan is over the winter to design an EFI intake mainfold
> > that will feed over 400 ci SBC.
> >
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org