Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion

[Shannen Durphey <shannen@grolen.com>]

Niinikoski, Juha wrote:
> 
> Shannen and Bruce, thanks for information.
> Color codes had faded away from my injectors. I repeat my question: Are
> there somewhere in the net TBI injector flow rate / application charts ?

There is a list on the ftp site.  It is a work in progress.  If you
find information for your injectors, I would gladly place it in the
injector flow chart.
> 

> Took a little digging, but here ya go:
> MY 1987,
> throttle lever side orange/green
> tps side pink/brown
> 
> 1987 what ? What engine, V6 or V8 ?
4.3 litre v6.

> Bruce Plecan wrote:
> Add the cross fire,
> 4.3s used two different ones?
> You happen to remember the color code?.
> Grumpy
> 
> 
> > The 4.3 litre v6 has two different size injectors.  That's the only
> > one I'm aware of.
> > Shannen
> >

> 
> Hey, wouldja lookit that!  Says the two throttle bodies that are
> equipped this way are #ed 17087090, and 17087162.
> ,
> > > >
> > > > I also managed to get
> > > > two pieces 5235206*RPD injectors
> > > > and
> > > > two pieces 5235203*RPD injectors
> 
> I still need to understand what are these animals ?
Good luck in your quest.
Shannen
> 
> Juha
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org