Re: tbi identified/ Injector sizes / Rover 3.5 efi conversion

[Shannen Durphey <shannen@grolen.com>]

Shannen Durphey wrote:
> 
> Niinikoski, Juha wrote:
> >
> > Shannen and Bruce, thanks for information.
> > Color codes had faded away from my injectors. I repeat my question: Are
> > there somewhere in the net TBI injector flow rate / application charts ?

Oops, this is ambiguous.  There is a list on the ftp site, but it does
not have flow information for your injectors.  If you find flow
ratings, I will add them to the list.
Look for fuelflow.doc or fuelflow.txt.  You might want to look through
the A******s while you're there.  The color codes I mentioned might be
in there.
Shannen
> 
> There is a list on the ftp site.  It is a work in progress.  If you
> find information for your injectors, I would gladly place it in the
> injector flow chart.
> >
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org