[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MAF and 89 Vet stuff



I've done lots of 89 bins onto 86,87,88 memcal's.  If it doesn't work
something else is wrong.
Mark
----- Original Message -----
From: "Bruce Plecan" <nacelp@bright.net>
To: <gmecm@diy-efi.org>
Sent: Sunday, August 13, 2000 9:10 AM
Subject: Re: MAF and 89 Vet stuff


> Since it just wan't me, guess then that's the way to do it.  Whoda thunk
> Grumpy
>
>
>
>
> > I've had the same trouble. Burning an '89 bin into an '87 memcal
wouldn't
> > work. The ECM wouldn't recognize it and ran in limp mode.
> > Nick
> > > ------------------------------
> > > From: "Bruce Plecan" <nacelp@bright.net>
> > > Subject: Re: MAF and 89 Vet stuff
> > > In the past I'd just used a 89 memcal, and was fine.
> > > Last week had a car that I tried writting 89 code on a 87 memcal, and
it
> > > wouldn't start.   Would up editing his and he was happy.
> > > Make any sense needing 89 memcal to do the switch?.
> > > Grumpy
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org