[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Ford injectors



I've put the 24lb Ford injectors on my '85 TPI 'Vette and they work great.
They are shorter, but as you said, they do fit in the fuel rail enough.

Craig M.

> -----Original Message-----
> From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of WEG1192@aol.com
> Sent: Wednesday, August 16, 2000 6:54 PM
> To: gmecm@diy-efi.org
> Subject: Re: Ford injectors
>
>
> Eric,
>
> I can't vouch for whether the Ford injectors will actually be identical
> electrically, but I have been told by bunches of people that they
> will work.
> The electrical connector does fit since I just went out and tried
> one and it
> worked. The only problem I can see is that the Ford injector is
> about 1/8"
> shorter than the GM injector which means the Ford will not fit up
> inside the
> fuel rail as far. But I put a Ford injector in my spare rail and
> it seems to
> go far enough to seal good. I believe the Ford injector is a
> Japanese part
> since the word Denso is on the side, maybe there is a relation
> between Nippon
> Denso, maybe not. At just slightly more than $25 per injector, I
> think GM is
> going to lose my injector business unless someone convinces me that GM
> injectors are better in quality sufficiently to justify using GM ones.
>
> John Wilson
> ------------------------------------------------------------------
> ----------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org