[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ford injectors




On Thu, 17 Aug 2000, Dan Townsend wrote:

> The dark blue 30# svo injectors that I had did have the grooves and I got
> them about a year ago.  I have ran the injectors without the retention clips
> with no problems.  Just be careful when you put the rail back together not
> to cut an o-ring like I did.  The o-rings I am talking about are part of the
> rail assembly not the ones on the injectors.
> 
> Also the 30# will work with a stock chip on a stock engine but don't go WOT
> :-)

I ran my car for a very short time with 30# injectors (the car came
with 24), and "work" is probably too clean of a term.   It ran with
the 30# injectors, but just barely, and really really badly, and you
could smell the gas everywhere.

And of course after adjustment, everything worked great.

			Roger

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org