Re: Since were talking injectors......

[timsiford@hushmail.com]

I just put 30lb SVO injectors in my '90 IROC (stock bottomend 350 w/ AFR 
heads, 218/224 cam, MiniRam).  I have the FP set at 45psi and changed the 
injector constant to 33lb/hr.  Idles NO differently than it did with the 
stock 22lb GM injectors.  Idles GREAT!

Tim


At Thu, 24 Aug 2000 14:09:21 -0400, "JN" <jwn@sgi.net> wrote:

>
>Here is how my 89 6 speed Vette motor will be built:
>
>383 cubic inches
>11:1 Compression
>CNC Ported L98 heads 2"/1.57" valves
>Lingenfelter cam .560/.560 lift 219 degrees duration
>Lingenfelter Super Ram intake
>Rear factory gears 3.33:1
>
>Looking at about 430 horsepower 470 ft lbs of torque.
>I have a new set of FMS 30 pound injectors.  Based on my calculations,
> this
>should be slightly on the big side.  Seems 24's are too small and 30's 
>are
>too big.  I plan on changing the injector size in the E-prom to 30 lbs/hr
>and starting FP at 43 or so for start up.
>
>Comments on this size for pw at idle?  Does setting the injector size 
>in the
>prom to say 32 have any affect?
>
>Thanks.
>
>Jason
>
>--------------------------------------------------------------------
>--------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>