Re: Found my 8051

[Scot Sealander <Sealand@clarityconnect.com>]

Bruce Plecan wrote:
 
> Is there a secret code needed, or is it just me?
> Bruce

I have Win98, and Wordpad opened it just fine.

I have attached a dot txt file, but it needs to be formatted.

He did put the text in the color of the connector...

Scot

	Red	                Blue	                Grey	                Black

1	Crank Sensor (96 only)	GND	                IAC Coil A High	        A/C Request
2	GND	                Trans Press Con Sol Low	IAC Coil A Low	        Low Resolution Signal
3	Injector # 1	        Ignition Positive Volts	Right Rear O2 Low(96 only) Distributor Ref Low
4	Injector # 4		Right Rear O2 High (96 only)	
5	Injector # 6		IAC Coil B Low	Ignition Control
6	Injector # 7	Trans TCC PWM Sol	IAC Coil B High	Sensor GND
7	FP relay	Serial Data  Class 2(96 only)	Right Front O2 Low	Trans 1-2 Shift Control
8		A/C Clutch Control	Right Front O2 High	VSS Out
9	EGR Control	MIL Control		
10	Cooling Fan R2&3	EVAP Purge Sol.		
11	Cooling Fan R1	Trans TCC Sol.	TCS Active signal	
12	EBTCM TP sensor Signal	A/C Pressure sensor		Trans 2-3 Shift Control
13	Tachometer Out		Performance Mode Switch Signal	Skip Shift Control or 3-2 downshift
14	Air Pump Relay		Brake Signal Switch	Distributor Ignition feed
15	Trans Mode Lamp Control	Skip Shift Lamp	PNP Switch	+12V Battery
16			Trans Pressure Control Sol.	Sensor GND
17			Left Rear O2 low(96 only)	
18	GND		Left Rear O2 High(96 only)	
19	Injector # 2		Left Front O2 Low	MAF signal
20	Injector # 5	Output/Field service Enable	Left Front O2 High	High Resolution Signal
21	Injector # 3		IAT sensor	A/C Clutch Status
22	Injector # 8	Knock Sensor	TP sensor	
23	TCS Retard Control		MAP sensor	EVAP Vacuum Switch (96 only)
24		A/C Temp Sensor		
25	Fuel Enable signal		ECT sensor	
26				
27				
28		Trans Fluid Temp Sensor	Trans Range Signal A	5 Volt Reference
29			Trans Range Signal B	5 Volt Reference
30		Serial Data	Trans Range C	 Ignition Positive Voltage
31	VSS Signal Low			Bat Positive voltage
32	VSS Signal High		GND