[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: injecting oldsmobiles



For a $30 adapter plate use the trany (if you mean you really have
everything)
Or the whole drivetrain
What actual masks are you running?.
Seems like a manual tranny code might be the answer for the some  of this
Bruce




> Hey - lets say I had a 79 olds with  350, forged pistons, dual exhaust,
> edelbrock cam (too small) and manifold, HEI, TH350 trans and a holley 750.
> And I had both a 93 8625 and 94 7427, and I wanted to slap some things
> together.  The biggest problem that I see is getting the ECM to deal with
not
> having a transmission it can talk to.  I can modify the bins inside
tunercat
> to make things run, but I would also need to disable all the codes that no
> trns would set.  Anyone done anything like this.  I still have everything
> that came off my 93 truck.  The car has one of those 2 magnets on the
> driveshaft and a coil pickup for a jc whitney cruise control - could i use
> this for vss?
>
> Thanks for listening to my electroyappin!
> Ryan Hampl - a K-State Grad!    kasaryan@aol.com
> 139 Hoover Ct.                  Controls Engineer (tubes rule!)
> Salina, KS  67401               97 B12 / 86 V65 / 93chevy truck EFI 383
> phone  (785) 825 5831           I'M ALWAYS FIRST TO THE GROCERY STORE!
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org