At 09:08 AM 9/3/2000 -0400, you wrote:
Was at the recycling center the other day, and they had a bunch of Ford engines in the core area, couple of them had a TB with a 90d elbow at the flange side. Which might come in handy for doing a turbo conversion to a carb manifold, or limited above engine room transplant.
If those were 5.0L V8's they were from Explorers... They used the 90 to make room for the intake parts. Mustangs had room to come off either straight to the pass. side, or a 45 degree bend to the front.
---------------------------------------------------------------------------- To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes) in the body of a message (not the subject) to majordomo@lists.diy-efi.org