Re: Prom Burner

["Dan Townsend" <xybertron@cox-internet.com>]

Well it looks like I will get the Pocket Programmer and the $49 Eraser from
digikey.  Now what chips do I need to get for the 87-89 and 90-92 F-bodies
and what speed?  Thanks.

From: "Bruce Plecan" <nacelp@bright.net>
To: <gmecm@diy-efi.org>
Subject: Re: Prom Burner

> You will need a double row pin header in order to read the EPROM in the
> MEMCAL without unsoldering the EPROM (a major PITA). Take a look at the
new
> FAQ section in the GMECM and it will tell you where to get the header. I
> bought mine at a local radio parts supply store (forget Radio Shack). As
for
> an Eraser, I have finally decided to build my own with a G15T8 ultraviolet
> bulb and a standard 18" light fixture from Home Depot. All the Erasers
I've
> inquired about will not accept the MEMCAL. Check out intronics website on
> how
> to build an eraser yourself.
>
> With a drop of solder the Dataraser II will work.
> Just need to defeat the cover switch, and NOT LOOK INTO IT
> Bruce

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org