[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: B Codes



----- Original Message -----
From: Peter Gargano <peter@techedge.com.au>
To: <gmecm@diy-efi.org>
Sent: Monday, September 04, 2000 3:55 PM
Subject: Re: B Codes

> OTOH, the FMD determines the cylinder count from the NetRes too,
> but, as has been pointed out before, the NetRes's cylinder count can
> be changed with an extra resistor across two pins of the MemCal.
>

suppose I'll have to look that one up...

> The knocksensor signal conditioning circuit ("ESC circuit") should
> be specific to a motor and/or the sensor's placement.
>

Now thats a downer.

so what you are saying is that unless I wanted to turn knock detection OFF,
and patch the thing with a resistor that they are good for prom donors only.
I may have still made out.

cool - a calpak 'mobile'.. anyone got a coat hanger?

Thanks for the info, you too ludis.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org