[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Modifying VE Tables

To: gmecm@diy-efi.org
Subject: Re: Modifying VE Tables
From: WEG1192@aol.com
Date: Sun, 1 Oct 2000 23:36:05 EDT
Reply-to: gmecm@diy-efi.org
Sender: owner-gmecm@lists.diy-efi.org

If your BLMs are low, then the ECM is removing fuel to compensate for a rich 
condition. So you need to remove fuel in that area of the VE table to bring 
the BLMs back up to 128 (or slightly less than 128 per Bruce's tuning tips).
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org

Prev by Date: Re: Spark advance tuning made simple and quick?
Next by Date: Re: PCV valve for TPI
Previous by thread: Re: Modifying VE Tables
Next by thread: Re: Modifying VE Tables
Index(es):
- Date
- Thread