Re: injector size (was Nother thought)

["Dave Zug" <dzug@delanet.com>]

They may have said that the actual pulse widths at idle would be greater
than the reported value. I'm curious what RPM do you idle at, and what are
the PW's at idle.  I have no experience with big injectors but I beleive in
the logic behind what someone may have told you. Hows the fuel mileage? Hows
emissions at idle? Otherwise?

----- Original Message -----
From: <timsiford@hushmail.com>
To: <gmecm@diy-efi.org>
Sent: Thursday, October 05, 2000 7:10 PM
Subject: Re: injector size (was Nother thought)


> Nick,
>
> Yeeeeup.  I was told by several people that 30s are too big for my 350ci
> engine and that it wouldn't idle well.  Idles great.  heh heh ... maybe
> I should have went with 36lb injectors :-)
>
> Tim
>
>
> At Thu, 5 Oct 2000 22:24:43 -0400, "NickG" <nikog@mediaone.net> wrote:
>
> >
> >> car for only an hour before I ordered a set of 30's.  The 30's have
> >acceptable
> >> DCs ... in the order of 77% at 6500rpms ... and, the car idles great.
> > I
> >> have the injector constant set to 33lb/hr in the PROM and I am running
> >45psi
> >> at the rail.
> >
> >I have those injectors in a mass-air 406 TPI with 45psi fuel pressure.
> >The
> >PROM is also set for 33lb injectors, and it runs with a BLM of 123-128
> >when
> >idling in gear. Like you said, the car idles great. Nice to see somebody
> >else is running a somewhat similar setup with the same results.
> >
> >Nick
> >
> >
> >--------------------------------------------------------------------
> >--------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org