[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: ecm's



Yep, ziff socket method works pretty good.  See the archives for details on
this thread.  AUJP is the calibration code in the eprom on the Memcal.  

To at least start looking around, download the current (7730v4.ecu, I
think) ecu file for WinBin and a '730 V8 bin from the FTP incoming.
There's a copy of AUJP there, ANHT is there too which is a 'vette
application. 

-> Bob Valentine
-> bob@tecmark.com
 

At 04:42 PM 10/17/2000 -0400, you wrote:
>Ah, so what is an AWFU memcal.  I am supposing that it is a memcal for the
>305 as well.  I was thinking of using the method of sodering in a ziff
>socket so I could change the chips.  Now from what I have read I can use a
>28 pin, 256K cmos EPROM, right.  But since I don't have a AUJP memcal to
>start with I will have to get a good start file for my car from somewhere.
>Or all these questions could be way off base.
>
>So file wise I would need...
>
>7730.ecu or something similar and
>?????.bin
>
>I am trying to use win.bin right now just to kind of get a head start to see
>if I can understand things a little bit.
>
>Thanks
>Matt
>
>-----Original Message-----
>From: owner-gmecm@diy-efi.org [mailto:owner-gmecm@diy-efi.org]On Behalf Of
>Len Sabatine
>Sent: Tuesday, October 17, 2000 12:35 PM
>To: gmecm@diy-efi.org
>Subject: Re: ecm's
>
>   Yep , 8262 replaces 7730 , AUJP Memcal , good baseline for Auto Trans.
>   Len
>
>>My ECM number is 16198262.  This is number for a 90-92 305 TPI right?  I am
>>working on a 383 build up engine that I want to make TPI.  Can I use this
>>ecm and the PROM (reprogrammed of course) for a 383?  Does any have a good
>>BIN and ECU I can start with?
>>
>>Thanks,
>>Matt
>>---------------------------------------------------------------------------
>-
>>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org