Re: 7747 spark control questions.

[rr <RRauscher@nni.com>]

Digression alert:

Ever see the pump-shot values in that bin? They are seven times the duration
of a 5.7l bin! (ARHT) To get a decent throttle response on my 327 TBI, I split
the difference between the 5.7l bin and the ANTZ bin. I had originally added
20% to the 5.7l bin, and it had no effect. I then added another 20%, no
effect. Finally did the above change. Worked!

BobR.


Shannen Durphey wrote:

> Here's an example of exactly what I meant.  ANTZ8364, 89 3/4 ton
> w/454.  Base timing 4deg BTDC, base timing value in ECM, 4 deg.  That
> way the timing values in the table reflect timing at the engine.
> BTW, I placed antz8364.bin in incoming.
> Complete specs:
> ANTZ8364  1988 3500, RVCK, 454, 4SPDMAN, 3.42/3.73 REAR GEAR, 7747ECM
> Shannen
>

<snip>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org