Re: 7747 spark control questions.

[Squash <realsquash@yahoo.com>]

I've gotta make sure that i'm clear on this because I had it figured out once :)

Timing table says 20, bias says 4, dist set to 4, you have 24 degrees of total timing.  This will
allow 46 degrees total (42+4).

Squash

--- Shannen Durphey <shannen@grolen.com> wrote:
> Here's an example of exactly what I meant.  ANTZ8364, 89 3/4 ton
> w/454.  Base timing 4deg BTDC, base timing value in ECM, 4 deg.  That
> way the timing values in the table reflect timing at the engine.
> BTW, I placed antz8364.bin in incoming.
> Complete specs:
> ANTZ8364  1988 3500, RVCK, 454, 4SPDMAN, 3.42/3.73 REAR GEAR, 7747ECM
> Shannen


__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf!  It's FREE.
http://im.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org