[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

2 bar 730 V8 was: Re: ALDL stream recycle time



Oops that was not supposed to go to the list, but well I looked thru the
FTP, wasn't there someone who put up an attempt at a 730 2-bar MAP V-8
binary?

I can figger the few things I could do to make a half ashed effort at one
but I wondered how close I am. no way is it as simple as I am thinking so
research time.



----- Original Message -----
From: Dave Zug <dzug@delanet.com>
To: <gmecm@diy-efi.org>
Sent: Monday, October 30, 2000 6:45 PM
Subject: Re: ALDL stream recycle time


> Hey John, Can you give me a link to your website? I thought you had a
2-bar
> MAP bin over there.. Did you?
>
> Thanks.
>
> ----- Original Message -----
> From: John S. Gwynne <jsg@jsgpc.mrcday.com>
> To: <gmecm@diy-efi.org>
> Sent: Tuesday, October 17, 2000 6:46 AM
> Subject: Re: ALDL stream recycle time
>
>
> >
> >
> > | Rephrased: Does the ALDL stream ('165 and or '730) simply repeat nose
to
> > | tail or is it's transmission restarted at a set interval of time?
> >
> > it definitely can be made to repeat nose-to-tail with smaller frames
> > and do a faster update rate as you ask.
> >
> > quick and dirty....
> >
> > You could replace each entry in the MODE1 address table with that for
> > MAP (for example). Then each MODE1 frame would give 63 readings of
> > MAP. You probably would need to time stamp each byte as received to
> > make sense out of the stream; each sample would not necessarily have a
> > fixed sample period.
> >
> > Similarly, you could divide the 63 data bytes into 3 or 4 sub-frames for
a
> > faster update rate.
> >
> > john gwynne
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org