Re: 730 ECM Swap

["Bruce Plecan" <nacelp@bright.net>]

Well, might just ask for the following:

12020756 (Blk Hdr)
12048046 (Yel Hdr)

Blk is just like the C-3 / 165s
Yellow is like the one on the 730s.
Those are part no.s that he sold me in the past.
Also, verified with the Packard Book.
Bruce
  Maybe it was the threat of 7 lil guys showin up that was the trick




> I spoke with John in length, a few months back, and while he can deliver
> the wiring harness connectors, he is not a source for any connectors
> inside the ECMs. (harness header, memcal header, etc..)  So I'm still
> hacking up ECM's to get to them.  I even contacted AMP about the headers
> and they've never seen anything like them..  Are there any contacts
> thru Delco Electronics?
>
> mike
>
>
> In message <05bf01c042db$f2c45cc0$730ac9d8@brucescompute>,Bruce Plecan
writes:
> >
> >The archives,
> >John Flagg
> >has that ecm side connector, they were like $8 some time ago.  Beats
nukin
> >an ecm to get it.
> >Bruce
> >
> >> The thingy in the picture is a custom made up adapter for putting a 730
> >> computer on a 165 harness.
> >>
> >> If anyone finds one of these harnesses in the junkyard, I can list 2
> >> people... one of which is probably in the hospital ;-) that it might
belon
> >> to.
> >>
> >> Those are from various cavileers and GM trucks. The tricky one to find
is
> >> the yellow connector - otherwise you have to trim a ridge off another
type
> >> of connector. The picture shows one with the non-yellow improv. Mike's
web
> >> pages describe its construction. Info was gathered from alot of these
good
> >> helpful listers and the labor and testing and refinement (version 2 in
> >> development) was done over a period of many months.
> >>
> >> The ecm's are under the passengers dash. pull em down and snip (make
sure
> >> the yard isnt goin to kill you for ruining a $100 harness, they're
usually
> >> clueless) the 3 connectors as far up the wire as you can - at least
8-10
> >> inches if you can do it.
> >>
> >> UNfortunately the connector to the left side of the picture is actually
a
> >> de-solder from an ECM. Its where the harness plugs in. You muse destroy
a
> >> whole ECM (get one from a 4 or 6 cyl for cheap.. do not destroy a good
> >> '165!)
> >>
> >> So far I have not seen one on ebay, or in juggs or smellit performance
> >> catalogs but I expect it will happen sometime.
> >>
> >> Sorry mike if you went to bed already
> >>
> >> Signed - Dave (Temporary Acting Mike) @;-)
> >>
> >> http://www.cis.udel.edu/~davis/z28/
> >>
> >>
> >> ----- Original Message -----
> >> From: Dan Townsend <xybertron@cox-internet.com>
> >> To: <gmecm@diy-efi.org>
> >> Sent: Monday, October 30, 2000 4:36 PM
> >> Subject: 730 ECM Swap
> >>
> >>
> >> > I need the harnesses in the following picture for my swap.  I looked
> >> around
> >> > all today and couldn't find them at our local salvage yards.  Any
help
> >> would
> >> > be great.  Any models of vehicles I could grab them from would also
> >help.
> >> > TIA
> >> >
> >> >
http://www.cis.udel.edu/~davis/z28/ecm_swap_730/photos/header_glued.jpg
> >> >
> >> > Dan
> >> >
> >>
>
>> -------------------------------------------------------------------------
-
> >> --
> >> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> >> > in the body of a message (not the subject) to
> >majordomo@lists.diy-efi.org
> >> >
> >> >
> >>
>
>> -------------------------------------------------------------------------
-
> >--
> >> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> >> in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >>
> >>
> >
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo@lists.diy-efi.org
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org