[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Adding another O2 sensor



They are at least as fast if not more so then the oem ones.
Remember the ecm is shooting for a 14.7:1  AVERAGE, do it hammers things
real rich and lean.
The oem one's ******errors****** is when folks try to read them as a WB.
They develope cross counts at the same rate as the oems, from what I can
see.
At the Powwow we had a scope on the WB and you could see the individual
cylinder firings, and how they swung rich lean.
Bruce




> Any comparisons to a wideband to show how GOOD they are at measuring
14.7:1
> in switch-mode?  Are they extremely good at it, or still full of error?
> Steve
>
> -----Original Message-----
> From: Bruce Plecan [mailto:nacelp@bright.net]
> Sent: Thursday, November 02, 2000 12:40 AM
> To: gmecm@diy-efi.org
> Subject: Re: Adding another O2 sensor
>
>
> IF, all your doing is reading side to side for 14.7:1 comparisons, Sure
why
> not.  The oem  sensors are of a switching type.  They are not meant to be
> WBs.
> Bruce
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org