Re: History & $5D Calibration Information?

["Bruce Plecan" <nacelp@bright.net>]

4 Cylinder Turbo


> Here's a lengthy post with a simple question on the last line.
>
> Following on from a couple of threads relating to what people know
> and are willing to share and contribute to the group, I have the
> following question - it's right at the back of this post, but I think
> the background is important too  8^)...
>
> For more than a couple of years there has been a document floating
> around that compares 4 different 1227808 calibrations. I don't know=20
> the author of the original information, but apparently is came from
> an Australian source (see extract from archives below). As this post
> indicates, Bruce made this information the subject of his short=20
> "programming 808" series he started in June 1998:
>
> =A6$From: "Bruce Plecan" <nacelp@bright.net>
> =A6$Subject: Programming 808
> =A6$Date: Sun, 21 Jun 1998 09:50:16 -0400
> |
> =A6Well just so nobody gets up in the air about it, Programming 808
> =A6will be starting shortly.  Since one of the blokes from oz has been
> =A6so nice to share some of the tables/switches/settings, we might as wel=
> l get
> =A6more irons in the fire.  Programming 101 is still going, but
>
> More recently, mid year in fact, Bruce wrote:
>
> > From: "Bruce Plecan" <nacelp@bright.net>
> > Subject: 808 Hac
> > Date: Sat, 17 Jun 2000 21:13:01 -0400
> >=20
> > This applies to the 1227808/1227165  using the ASBX memcal.
> > While not a true hac it shows alot of what happens where
> >=20
> > Address 4TCyl  4 Cyl  6 Cyl  8 Cyl  ALL FILES ARE COMPARED TO 8 CYL.
> > xC000
>
> Even more recently, I have made available an ECU file for this $5D calibr=
> ation
> (ie. for ASBX), but using information that was supplied to me directly.
> I want to thank that person, and you'll appreciate that they wish to rema=
> in
> anonymous. I also want to thank Bruce for his great explanations, and for=
>  the=20
> help he's given me in the past, but,
>
>    perhaps someone else can answer this question:
>
>    What does the "4TCyl" table refer to?
>
> Peter.
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org