Re: 730 ECM Swap

["Dave Zug" <dzug@delanet.com>]

That is what the subject started out as, and still is but has narrowed to
one of the KEY connectors and where / how to get it.

If you want to simply swap go to Mike D's page and look at the pin
references and re-pin the harness yourself and do the other 2 things and
you're done.

This is the DIY method (albeit using alot of others' research) - note the
name of the mailing list. ;-)

If you want a "kit" , made by someone else you'll probably have to pry it
out of their cold, dead hands. lots of effort and hours to make one of
those, then its like one of your children.

the one in mike's picture allows you to swap between either system (MAP and
MAF) in about 2 minutes, once installed. pretty neet.



----- Original Message -----
From: JN <jwn@sgi.net>
To: <gmecm@diy-efi.org>
Sent: Friday, November 03, 2000 11:27 AM
Subject: Re: 730 ECM Swap


> Pardon me but what are we talking about here?  I'm interested in a 730
swap
> form a 165.
>
> Jason
> ----- Original Message -----
> From: "Marteney, Steven J." <smarteney@xlvision.com>
> To: <gmecm@diy-efi.org>
> Sent: Friday, November 03, 2000 2:00 PM
> Subject: RE: 730 ECM Swap
>
>
> > Can count me in for 2 as well.
> > Steve
> >
> > -----Original Message-----
> > From: Dave Zug [mailto:dzug@delanet.com]
> > Sent: Wednesday, November 01, 2000 9:57 PM
> > To: gmecm@diy-efi.org
> > Subject: Re: 730 ECM Swap
> >
> >
> > I'm in for 2 if it happens.  Personal consumption only. ;-)
> >
> > ----- Original Message -----
> > From: Dan Townsend <xybertron@cox-internet.com>
> > To: <gmecm@diy-efi.org>
> > Sent: Tuesday, October 31, 2000 6:34 PM
> > Subject: Re: 730 ECM Swap
> >
> >
> > > I asked them exactly that.  I will let the list know what I find out.
> > They
> > > kinda wanting to build the conversion but I rather do it myself and
save
> > > some cash.  Maybe they will do a group purchase :-)
> > >
> > > Dan
> > >
> > > ----- Original Message -----
> > > From: "Romans, Mark" <romans@starstream.net>
> > > To: <gmecm@diy-efi.org>
> > > Sent: Tuesday, October 31, 2000 7:01 PM
> > > Subject: Re: 730 ECM Swap
> > >
> > >
> > > > Yes, but will they sell just the adapter?
> > > > ----- Original Message -----
> > > > From: "Dave Zug" <dzug@delanet.com>
> > > > To: <gmecm@diy-efi.org>
> > > > Sent: Tuesday, October 31, 2000 6:27 PM
> > > > Subject: Re: 730 ECM Swap
> > > >
> > > >
> > > > > Holy cow - yep its right there!
> > > > >
> > > > > This is Mike D's project - I just sit in the background and
verbally
> > > abuse
> > > > > the engineering practices and collect the prototypes. ;-)
> > > > >
> > > > > I'm sure he's seen the post but I'll make sure - THANKS Bruce and
> .JW!
> > > SO
> > > > > far no "good" ECM was sacrificed.
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: <WEG1192@aol.com>
> > > > > To: <gmecm@diy-efi.org>
> > > > > Sent: Monday, October 30, 2000 6:30 PM
> > > > > Subject: Re: 730 ECM Swap
> > > > >
> > > > >
> > > > > > Dave,
> > > > > >
> > > > > > I think I saw the ECM side connector that you are talking about
on
> a
> > > > > website
> > > > > > the other day. I'll post the link here and you can check it out.
> May
> > > > keep
> > > > > > someone from destroying an ECM.
> > > > > >
> > > > > > http://members.aol.com/bigturbo1/index.html
> > > > > >
> > > > > > JW
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo@lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org