Re: Scope pics...

[JTesta1966@aol.com]

In a message dated 11/14/00 6:57:40 AM Eastern Standard Time, 
n5xmt@triad.rr.com writes:

<< Fords service manuals try to explain the single platinum plugs as being for
 reducing wear due to the DIS polarity... when you replace the plugs, they
 say to use double platinum.
  >>

Right..the factory ford platinums were side specific. One side had platinum 
on the center electrode, the other side had platinum on the ground electrode. 
Double platinum removes the need for "bank specific" plugs.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim  (FA) Testa                                             TType86 on 
#BuickGN
ASE Master Technician                                buick.fiendish.net:6667
L1 Advanced Engine Performance                    NJ Lic MV Inspector
jtesta1966@aol.com                           NJ Lic Emission Repair Tech
http://members.aol.com/jtesta1966/buick.htm
Associate Sponsor, Buicks at Bristol (RCA/JTP)
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org