Re: PROM Size on a 165

["Mitch Louole" <brief456@hotmail.com>]

Sorry, that wasn't ECMGUY's schematic, was another:
http://www.cruzers.com/~ludis/1227165schematic.html

The other commets all make sense.  Pin 27 needs to be pulled high for the 
128 to work. (pin 27: 128: /PGM  256: A14)  i.e. A single load must be 
loaded high on the 256.

> From your comments I will assume that A14 is either not connected to the 
MEMCAL, or it is tied high, or this memory space is unused by the micro.  
All of which solve this small problem.

Thanks for the input.


_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org