RE: Emulator gone bonkers

["Jim Sloan" <leroy@sunflower.com>]

I never had this problem. I often program the emulator, disconnect it, then
hook up diacom.  I leave the emulator disconnected from the laptop most of
the time.

I'm not sure how you have the adapter socketed to your memcal.....maybe an
intermittent problem there.

Jim Sloan
leroy@sunflower.com

> -----Original Message-----
> From: owner-gmecm@diy-efi.org
> [mailto:owner-gmecm@diy-efi.org]On Behalf
> Of Keith
> Sent: Thursday, November 30, 2000 1:16 PM
> To: gmecm@diy-efi.org
> Subject: Re: Emulator gone bonkers
>
>
> The emulator is cool cause you can edit the bin on the fly.
> If you know hex and the addresses it's easy.
> Keith
>
> Bruce Plecan wrote:
> >
> > I'm still stuck on testing and burning chips.
> > How ever, I've got one of Todds Switchers, where I can run
> 16 bins, and
> > switch between them.
> > I still haven't installed it yet, but it really looks like
> the way to go.
> > Takes alot less mental effort to keep track of what's going
> on, and allows
> > me to more consentrate on driving.
> > Just a sheet of paper for notes and being able to do that
> many looks to be a
> > winner.
> > Dunno for sure but a MSD 7A and solid wires would seem to
> be a real RFI
> > generator
> > Bruce
> >
> > > I had a weird experience with the EPROM Emulator that i
> bought from
> > > http://www.ldti.net/epm_emu.htm.
> > > I hooked up the Emulator to a 92 Typhoon and it was
> running fine when
> > > testing it on the street but when I tried to run it at
> the track it
> > > crapped out on me. It seemed like it lost the program, i
> resent the file
> > > to the eprom and it ran well for a couple of minutes and
> then dropped
> > > again.
> > >
> > > Is it possible that something was interfering with the
> Emulator at the
> > > track?
> > >
> > > After a crappy run down the track, I resent the bin and
> tested the truck
> > > out in the street and it was fine. I did 3 launches
> without a problem.
> > >
> > > Has anyone else ever come across this problem?
> > > Thanks.
> > > --
> > > Keith F.A.S.T.
> > > Riverview, FL
> > > '91 GMC Syclone #2173
> > > '75 Oldsmobile Hurst/Olds
> > > '92 Nissan Sentra SE-R
> > > http://www.syty.net
> > > Direct Forum link -->>>
> > > http://www.syty.net/cgi-bin/Ultimate.cgi?action=intro
> > > See my homepage at  -->>> http://home.tampabay.rr.com/keith455
> > >
> --------------------------------------------------------------
> ------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm"
> (without the quotes)
> > > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
> > >
> > >
> >
> >
> --------------------------------------------------------------
> --------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm"
> (without the quotes)
> > in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
>
> --
> Keith Gill F.A.S.T.
> Riverview, FL
> '91 GMC Syclone #2173
> '75 Oldsmobile Hurst/Olds
> '92 Nissan Sentra SE-R
> http://www.syty.net
> Direct Forum link -->>>
> http://www.syty.net/cgi-bin/Ultimate.cgi?action=intro
> See my homepage at  -->>> http://home.tampabay.rr.com/keith455
> --------------------------------------------------------------
> --------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without
> the quotes)
> in the body of a message (not the subject) to
> majordomo@lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org