Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,

["Dave Zug" <dzug@delanet.com>]

----- Original Message -----
From: Dig <turbodig@yahoo.com>
To: <gmecm@diy-efi.org>
Sent: Tuesday, December 05, 2000 8:03 PM
Subject: Re: Progressive NOS (WAS Re: Part 2: Reading Plugs, pistons,


>
> What if you placed the fuel solenoid physically closer
>
> to the nozzle(s)? Make the NOS go through some extra
> plumbing on the way to the nozzle...

Myself, I'm using the injectors for fuel add, can't get closer than that ;-)
and YES, my NOS solenoid is 4 tubular feet away - at 1000 PSI its not much
of a delay but skipping the 'pre-run pugre' softens the effect alot. I
figured an accumulator chamber was needed also but whos gonna do that under
there?

>
> There's another potential app... control a NOS
> solenoid
> firing co2 into the exhaust housing until the turbo
> spools up...

ooh!  then you can get rid of that 3500 stall convertor too.


> As far as I'm concerned, I don't want faster spool-up,
> I'm already spinning 4 tires. (well, 2 and a peg-leg)

lol... gotta love the 3-G launch.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo@lists.diy-efi.org