[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: TPI Runner Question
JW,
The Speed Density TPI plenums are very different from the MAF TPI plenums.
I have seen and worked with both. The SD plenums utilize only one special
small diameter runner tube on the passenger side. This is for EGR. Idle
air control is handled completely differently. IAC air is injected through
the front of the plenum via the Throttle body. There is no longer any special
plenum sections and runner sections for IAC.
Tim
At Wed, 6 Dec 2000 01:27:57 EST, WEG1192@aol.com wrote:
>
>No, not the passenger side EGR tube, but the driver's side idle air
>tube. JW
>--------------------------------------------------------------------
>--------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo@lists.diy-efi.org
>