[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ramjet

To: gmecm@diy-efi.org
Subject: Re: Ramjet
From: Chipsbyal@aol.com
Date: Fri, 15 Dec 2000 09:24:26 EST
Reply-to: gmecm@diy-efi.org
Sender: owner-gmecm@lists.diy-efi.org

The RamJet uses the MEFI3 marine PCM. It is a speed density system, however
it is not a "true" speed density system. There are no "VE" tables or injector
constants to be calibrated. All injector pulse widths are directly taken from
the fuel tables. This PCM if properly recalibrated can use O2 feedback. One
more thing, the L31 heads are valve lift restricted. I'm not sure of the
exact spec, but I've heard .500 is about it.
AL

Prev by Date: Re: Ramjet
Next by Date: Re: strange check engine light
Previous by thread: Re: Ramjet
Next by thread: Programmer questions... which brand?
Index(es):
- Date
- Thread